T-Display-S3
ESP32-S3 display board built around a 1.9-inch 170×320 color LCD, with buttons and battery support.
- Platform
- Espressif ESP32-S3, Arduino/ESP-IDF/MicroPython
- Builds
- 02
LILYGO projects and devices
LILYGO hardware in Flashable includes the display-first T-Display-S3, keyboard-and-trackball T-Deck, and rotary-controlled T-Embed, all built around ESP32-S3. Manufacturer examples exercise each board’s screen, input, audio, power, and optional radios; Bruce and M5Stack Launcher add device-matched firmware workflows. The LoRa-equipped T-Deck also supports Meshtastic or MeshCore for off-grid messaging, but the installed radio band, antenna, regional settings, and exact T-Deck variant must agree. T-Embed’s optional CC1101 changes available hardware and disables its microphone. For the documented Arduino examples, core and display-library versions can be tightly coupled, and touch, Plus, or radio-specific binaries must not be treated as universal. Follow each device into original project sources, compatible firmware and practical guides.
4 entriesLILYGO programmable devices
T-Deck
Pocket ESP32-S3 communicator platform with keyboard, trackball, 2.8-inch touchscreen, audio and optional LoRa radio.
- Platform
- Espressif ESP32-S3 with optional SX1262 LoRa
- Builds
- 05
T-Embed
Handheld ESP32-S3 controller with a 1.9-inch screen, rotary encoder, audio and optional CC1101 Sub-GHz radio.
- Platform
- Espressif ESP32-S3, Arduino/ESP-IDF
- Builds
- 02
T5 E-Paper S3 Pro
ESP32-S3 development tablet with a 4.7-inch 960×540 e-paper touchscreen, GNSS, SX1262 LoRa, microSD, battery management and USB-C.
- Platform
- Espressif ESP32-S3 with 16 MB flash and 8 MB PSRAM, Arduino/PlatformIO · Arduino
- Builds
- 01